Showing 81–100 of 106 results
-
Sliding Load 3-26.5 GHz
$550.00From manufacturer product guide: The HP 911D sliding load represents an advance in calibration and network analyzers. The new load utilizes integral male connectors to form a near perfect airline without the discontinuities, which cause refelctions, associated with changeable connectors. The sliding load element is highly stable, with a reflection coefficient variation of less than 0.00032 as the location of the element is varied, providing a very accurate and consistent reflection which greatly increases the integrity of a calibration..
Specifications:
– Moveable load SWR: 1.066
– Load and stability + Connect and airline: 1.008
– Power rating: 1W Avg. 5kW Pk.
– Length: 256mm
***MPN 911D
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 29713 -
10,000 ohm NBS type 4-terminal Resistance
$300.00This is an NBS-type four terminal 10,000 ohm resistance standard. It is marked with both the Rubicon and the Honeywell brand names. The resistor was included in a box of standards that came out of the Leeds & Northrup calibration laboratory.
We were unable to determine any information regarding specifications for this standard resistor, however there was some information on the attached labels.
Calibration label marked ‘Limited Calib’, 9.99993 Kohm, ‘caled to 20 ppm only’. A Dymo tape label marked ‘REF STND’. A second Dymo tape label with value 9.999985 (Kohm). Serial number 103103.
The resistor was measured with a Fluke 8060 meter just to confirm that it was close to the nominal stated value, and that it had not been damaged. The standard is oil-immersed and has a rubber adhesive patch placed over the thermometer access port to stem leakage during transport..
Photo set 1691
***MPN
***OEM Honeywell
***SKU*** 23109 -
100 ohm NBS type 4-terminal Resistance
$300.00This is an NBS-type four terminal 100 ohm resistance standard. It is marked with both the Rubicon and the Honeywell brand names. The resistor was included in a box of standards that came out of the Leeds & Northrup calibration laboratory.
We were unable to determine any information regarding specifications for this standard resistor, however there was some information on the attached labels.
Calibration label stamped ‘LAB. STND, DO NOT REMOVE’. Dymo tape label with value 100.003. Date issued label 3 May 1967. Serial number 105207.
The resistor was measured with a Fluke 8060 meter just to confirm that it was close to the nominal stated value, and that it had not been damaged. The standard is oil-immersed and has a rubber adhesive patch placed over the thermometer access port to stem leakage during transport..
Photo set 1688
***MPN
***OEM Honeywell
***SKU*** 23106 -
Honeywell 1 ohm NBS type 4-terminal Resistance Standard
$300.00This is an NBS-type four terminal 1 ohm resistance standard. It is marked with both the Rubicon and the Honeywell brand names. The resistor was included in a box of standards that came out of the Leeds & Northrup calibration laboratory.
We were unable to determine any information regarding specifications for this standard resistor, however there was some information on the attached labels.
Calibration label stamped ‘LAB. FILE, DO NOT REMOVE’. Dymo tape label with value 1.00099. Date issued label 3 May 1967. Serial number 105171
The resistor was measured with a Fluke 8060 meter just to confirm that it was close to the nominal stated value, and that it had not been damaged. The standard is oil-immersed and has a rubber adhesive patch placed over the thermometer access port to stem leakage during transport…
Photo set 1687
***MPN
***OEM Honeywell
***SKU*** 23105 -
10 ohm NBS 4-terminal Resistance Standard
$200.00This is an NBS-type four terminal resistance standard. Cosmetic condition is very good, however one of the four clamp screws is missing.
Two values each were given in the L&N specification sheet on the 4015-B Series resistors (both current and amperage) – possibly one value was for the resistor used dry, the other for an oil-immersed resistor? I give both values in the specs I copied below. This resistor is older than the B-series so the specifications may not be accurate.
10 ohm – (model 4025?), serial number 659194, 0.1 (0.3) amps, 0.1 (1) watts, nominal adjusted value 0.003%, measured value 0.0001%. Last calibrated in 1958 at L&N – stated value 10.0049. Also a Dymo label with the figure 10.0063.
The standard is oil-immersed and has a rubber adhesive patch placed over the thermometer access port to stem leakage during transport. There is no data or calibration label on the resistor, but it was included in a box of standards that came from the calibration laboratory at Leeds & Northrup. The resistor was measured with a Fluke 8060 meter just to confirm that it was close to the nominal stated value, and that it had not been damaged..
Photo set 1682.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing..**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Leeds & Northrup
***SKU*** 23100 -
Decade set of NBS 4-terminal Laboratory Resistance Standards
Original price was: $2,400.00.$2,000.00Current price is: $2,000.00.Decade set of NBS 4-terminal Laboratory Resistance Standards. The set comprises a complete decade run from 1 ohm to 1 megohm, seven standards total. All of the standards are oil filled and may require special packing/transport. Call or email us for a shipping quote.
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Leeds & Northrup
***SKU*** 23099 -
APC-3.5 Scalar Open/Short 85037
$150.00Unit is a Hewlett Packard ( HP ) / Agilent 85037-60001 APC-3.5 Scalar Open/Short.
This scalar is in excellent cosmetic condition..BMI Surplus, Inc. has a huge inventory of new, pre-owned & recycled Electronic Parts For Sale!
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
**Shipping, Handling & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have over 30
years of experience shipping sensitive scientific instruments & industrial equipment. Be assured we ship with the utmost care!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
.
***MPN 85037-60001
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 26372 -
Multi-Filter Calibration Source
Call 781-871-8868 for Price
Multi-Filter Calibration Source
***MPN 310
***OEM Optronic Laboratories
***SKU*** 21918 -
RFI Corp 13619 160-1610 RF Line Filter 150VAC
$7.00RFI Corp 13619 160-1610 RF Line Filter 150VAC.
***MPN 160-1610
***OEM RFI Corp
***SKU*** 19989 -
HP 16517-63201 Calibration Pod
$19.00This is a P 16517-63201 Calibration Pod
This unit came from a working environment but has not been tested.
We apologize that a photo of this unit was not available at the time of listing.
Please give us a call or email sales@bmisurplus.com to request pricing, photos and additional information.BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN 16517-63201
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 19048 -
Hewlett Packard High Voltage Supply (5061B)
$100.00This power supply was pulled from an HP 5061B Cesium Beam Primary Frequency Standard. It is in excellent cosmetic condition, however the high voltage lead has been cut. Nomenclature on label states part number as 05060-6092, -2500 Volt Supply, Series 1940.
Location MB 25
Photo set 1156
BMI Surplus, Inc. is your #1 resource for new & used test
supplies!
Buy online or give us a call at 781-871-8868. We’re here ready
to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of shipping sensitive scientific instruments & industrial
equipment. We ship with the utmost care!***MPN 05060-6092
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 18157 -
Photo Research SPECTRA T.V. Optoliner
$1,200.00Photo Research SPECTRA T.V. Optoliner..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN SPECTRA
***OEM Photo Research
***SKU*** 17365 -
Veeco SC-4 Sensitivity Calibrator
$125.00Veeco SC-4 Sensitivity Calibrator..
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN SC-4
***OEM Veeco Instruments Inc
***SKU*** 17283 -
HP 85052A Calibration Kit Box
$50.00This item is a the box for a HP 85052A 3.5mm Calibration Kit.
The box needs new foam.***MPN 85052A
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 17276 -
HP 11752-60020 Male Connector Gage
$549.99This is a HP 11752-60020 Male Connector Gage
– Unit is a used HP 11752-60020 Male Connector Gage
– 3.5mm
– This item can be used with Agilent 911D
– This unit came from a working environment but has not been tested further.
– Please call us for more information.
***MPN 11752-60020
***OEM Hewlett Packard ( HP ) / Agilent
***SKU*** 17204 -
Infrared Industries Cavity Blackbody Reference
$200.00This is an Infrared Industries Cavity Blackbody Reference Source. This unit is for parts only.
Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search,***MPN
***OEM Infrared Industries
***SKU*** 38112 -
Analog Devices AD584TH Eight Terminal Precision Voltage Reference
$30.00This item is an Analog Devices AD584TH Eight Terminal Precision Voltage Reference
– V-Ref Programmable.
– 2.5V/5V/7.5V/10V
– 10mA
– 8-Pin
– TO-99BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN AD584TH
***OEM Analog Devices
***SKU*** 16443 -
Calibration Standards 259 & 745 Micro Inches
Call 781-871-8868 for Price
Calibration Standards 259 & 745 Micro Inches..
We apologize that a photo of this unit was not taken at the time of listing. Please give us a call to request photos and additional information.
BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.
Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications. We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though they are in good used condition.
*Pricing on untested items is discounted at time of listing.**Shipping, Handling and Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments and industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN
***OEM Calibration Standards
***SKU*** WP740 -
Eppley Labs Model 121 Standard Voltage
$300.00Serial number is 3473.
This item is in overall good cosmetic condition. There are some scratches on the face – see photos. Unit powers up when plugged in; unfortunately, we do not have the expertise to test it further. This item is being sold untested and “as is.” .
***MPN 121 standard
***OEM Eppley Laboratory Inc.
***SKU*** 508 -
Eaton Consolidated Controls UPC5000-AC
$2,200.00This is an Eaton Consolidated Controls UPC5000-AC Standard..
– Precision Pressure Calibration.
– The two hoses and power cord are included
– Rugged, compact
– Superior accuracy, range of calibration and ease of operation
– Used for the calibration of a wide variety of pressure sensing and measuring devices..BMI Surplus, Inc. has a huge inventory of used, new and pre-owned Calibration Equipment for sale.
We will work with you individually to find the perfect set up for your application.Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!
BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 33 years of experience shipping sensitive scientific instruments & industrial equipment!Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN UPC5000-AC
***OEM Eaton Corporation
***SKU*** 225
