NRC GM-2 Gimbal with Special Optics Modified Aperature
Good Condition
Check BMI Stock for More Items
***73320***

Micro-Controle 50mm Gimbal Mount

Optic diameter – 50mm
Optic thickness – between 1 and 12.5mm
Outside diameter – 124mm
Clear aperture of mount – 46mm
Approximate thickness of mount – 30mm (less micrometers)
Angular adjustment range – plus /minus 2 degrees

We have a large selection of Gimbal Mounts and
other optical mounts and fixtures.

Good Condition
Check BMI Stock for More Items
***65227***

Burleigh SG201 2″ Gimbal Mount and Angle Bracket

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts lack the optic carrier portion.

This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The removable optic carrier is missing from this mount – currently there is a clear bore of 2.255 inches diameter. One could easily fabricate a mirror holder to fit the bore.

The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws. The rear portion of the angle plate has been milled away (see photo).

Dimensions:

� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.

The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimension is 4 inches by 2.70 inches (base used to be 4 inches long). The reference plane lies approximately 0.875 inches from the front of the base plate.

Listing includes gimbal mount and modified support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy
***MPN SG201
***OEM Burleigh
***SKU*** 23054

Burleigh 2-inch Gimbal Mount Lens Holder

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.

This version is a bit earlier – the micrometer spindles lack the large plastic adjustment rings for increased setting sensitivity. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror. Please note – the retaining ring set in the third photograph is an optional insert for 1.5 inch diameter optics – tt is not included. In its stead, the standard 2-inch retaining ring will be supplied.

The last component is a right-angle bracket for attaching the gimbal mount to a table. The gimbal mounting support plate attaches to the bracket with four Allen cap screws.

Dimensions:

� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.

The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.

Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is superb. The mounts have been rebuilt and the micrometer spindles cleaned and relubricated The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy.

BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!

***MPN SG201
***OEM Burleigh
***SKU*** 23053

2 inch Gimbal Mount Lens Holder with Angle.

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal – both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings – two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts all come complete with all three components.

The micrometer spindles have large diameter plastic rings attached to the spindle drum to make it easier to accomplish very precise adjustments. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger to augment stability. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.

The last component is a right-angle support bracket for attaching the gimbal mount to a table. The gimbal carrying plate attaches to the bracket with four Allen cap screws.

Dimensions:

� Gimbal support plate – 4 inches wide, 4.75 inches tall (0.500 inches thick)
� Optic axis height = 2 inches
� Range of motion (azimuth and elevation) – approximately plus or minus 2 degrees
� Modified Starrett 263 micrometers with large thimble rings
� Overall depth with micrometers – 4 inches
� Minimum / Maximum mirror thickness – 0.25 / 0.60 inches.

The base plate adapter (right-angle bracket) raises the optic axis height to 2.375 inches. Overall baseplate dimensions are 4 by 4 inches. The reference plane lies approximately 0.875 inches from the front of the base plate.

Listing includes gimbal mount, 2 inch optic cell with retainer, and support bracket. Condition of everything is excellent. The gimbal plates in these mounts are cast steel, not the much lighter aluminum alloy. The mounts have been completely gone over and micrometer spindles cleaned and relubricated.

Photo set 1631 .

BMI Surplus, Inc. is your #1 resource for new, pre-owned,
recycled, refurbished & used optics, optical tables, laser
tables, vibration isolation systems, legs and bases & optical
support & optical accessories. We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868. We’re here
ready to help you!
**Shipping & Freight fees are dependent on your location. We
will provide a freight quote to meet your individual needs and
work with you if you prefer to use your own carrier. We have 30
years of experience shipping sensitive scientific instruments &
industrial equipment!
***MPN SG201
***OEM Burleigh
***SKU*** 23052

Klinger 1-inch Gimbal Mount BM micrometer

This item is a Klinger (also known as Micro-Controle, and now manufactured by Newport) SL type Gimbal optic mount. The SL gimbals are characterized by massive steel construction with two mounting flats for orthogonal positioning of the tilting axes so the controls are on the right or left side of the beam path. The two planes of tilt perfectly intersect the plane of the optic (often a mirror) so adjusting azimuth or elevation results in the reflection point always being stationary on the optic axis. The elements are held in place by a spring-loaded ring. There are three small bearing points to precisely locate the optic in the main yoke, and another three within the spring-loaded clamping ring. The securing screws are not quite symmetrically placed to aid in removal of elements through the slightly larger opening.

This particular gimbal mount uses the standard �BM� type micrometer. Readings do not correspond to angular rotation, but they are repeatable, and graduated to 10 microns (sensitivity of setting is approximately 1 micron).

Specification on this particular gimbal mount include:

Optic diameter � 25mm
Optic thickness � between 1 and 12.5mm
Outside diameter � 89mm
Clear aperture of mount � 21mm
Approximate thickness of mount � 30mm (less micrometers)
Angular adjustment range � plus /minus 3 degrees

The mount is in excellent condition � micrometers fully functional throughout range. There is a small hole drilled in one of the base flats (see photo). The mounts do NOT come with the adapter plate. Those are listed independently as SKU number DP252 (they are only available with the purchase of a matching type gimbal).

Location MB 143

Photo set 1057.

BMI Surplus, Inc. is your #1 resource for new, pre-owned, recycled, refurbished & used optics, optical tables, laser tables, vibration isolation systems, legs and bases & optical support & optical accessories. We will work with you individually to find the perfect set up for your application. Shop our Optical Tables for the most competitive optical table price. Buy online or give us a call at 781-871-8868. We’re here ready to help you!
**Shipping & Freight fees are dependent on your location. We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier. We have 30 years of shipping sensitive scientific instruments & industrial equipment!!
***MPN
***OEM Klinger Scientific
***SKU*** DP609

Lansing 1.5 inch 38mm Gimbal Mount with 2-inch Micrometers

These Lansing gimbal mountings are capable of holding optics or mirrors up to 1.5 inches in diameter. The mounting ring has three threaded holes on both the front and rear faces. The lens would be retained either by a pair annular rings or by small tabs at each of the thread locations. These will need to be provisioned separately � they are not included with the mount.

The other unusual feature on this mount is that the setting spindles for the azimuth and elevation are 2 inch range of motion, but only a small portion of this range may he employed. The spindles are engraved Lansing, so they are the original spindles. I can only surmise they were employed so the mount could be manipulated well away from the optic axis.

Optic axis height � 2.25″
Optic Dianeter – 1.5″
Base width � 4″
Base length � 4″
Range of motion � at least plus or minus 5 degrees
Graduated 2″ micrometer spindles

The mounts are in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting spindle micrometer.

Location MB 147

Photo set 1084
***MPN
***OEM Lansing
***SKU*** 16404

Lansing 2 inch Gimbal Mount with micrometer

This Lansing gimbal mount is capable of holding optics or mirrors up to 2 inches in diameter. Optics are retained in the mounting using a plastic threaded ring. Inside diameters of the rings vary, but most are 1.75 inches in aperture.

Optic axis height � 2.25 inches
Base width � 4 inches
Base length � 4 inches
Range of motion � at least plus or minus 0.5 degrees
Graduated micrometer spindles

The mounts are in excellent condition and fully functional. Magnetic bearing pads keep the gimbal mounting rings in contact with the anvil of the setting spindle micrometer.

BMI Surplus, Inc. has a huge inventory of new, pre-owned,
recycled & refurbished Optics, Optical Tables, Laser Tables,
Vibration Isolation Systems, Legs and Bases & Optical Support &
Optical Accessories For Sale! We will work with you
individually to find the perfect set up for your application.
Shop our Optical Tables for the most competitive optical table
price. Buy online or give us a call at 781-871-8868.We have
experienced customer service representatives standing by ready
to help you!!

**Shipping, Handling & Freight fees are dependent on your
location. We will provide a freight quote to meet your
individual needs and work with you if you prefer to use your own carrier. We have over 30 years of experience shipping sensitive scientific instruments & industrial equipment!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN
***OEM Lansing
***SKU*** 16403

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal � both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings � two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and an optional angle support plate. These mounts do NOT include the optic carrier or the optional angle support bracket.

The micrometer spindles are the earlier versions without the large diameter plastic rings. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger for extra rigid settings. The position of the plunger can easily be changed so it will be effective in the range of motion required.

Dimensions:

Gimbal support plate � 4 inches wide, 4.75 inches tall (0.500 inches thick)
Optic axis height = 2 inches
Range of motion (azimuth and elevation) � approximately plus or minus 2 degrees
Modified Starrett 263 micrometers.
Overall depth with micrometers � 4 inches
Minimum / Maximum mirror thickness � 0.25 / 0.60 inches (optic cell not included)

Listing includes ONLY the gimbal mount. Condition of everything is excellent. For the most part, these mounts are the earlier versions using heavy cast iron or steel components (later mounts used a much lighter aluminum alloy).

Location MB 98

Photo set 772.

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Mounts for sale.
We will work with you individually to find the perfect set up for your application.

Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN SG201
***OEM Burleigh
***SKU*** DP340

Burleigh SG201 2″ Gimbal Mount with Lens Mount.

This is a Burleigh gimbal mount for optics or mirrors of 2 inches diameter. It is a true gimbal � both the azimuth and elevation axes are co-planar with the front surface of the mirror cell. The mounts are exquisitely made from three basic castings � two for each of the gimbal planes and one for the supporting plate. There are three basic subassemblies to the mounts. The gimbal mount with the micrometer spindles; the removable optic carrier mount; and the angle support plate. These mounts include the optic carrier, but do NOT include the optional angle support bracket.

The micrometer spindles are the earlier versions without the large diameter plastic rings. Each axis has internal springs to keep the gimbal plates in contact with the micrometer spindles, and in addition, a spring-loaded plunger for extra rigid settings. The position of the plunger can easily be changed so it will be effective in the range of motion required.

The second assembly is the optic cell. This entire assembly is held in place by a large knurled collar from the back. It is possible to remove the cell from the gimbal mount in order to install the optic of interest. The cell is designed so the reference plane of the mirror sits precisely in the gimbal plane. The front of the cell is chamfered so almost the entire mirror surface may be used when the incident light angle is less than or equal to 45 degrees. The cell will accept mirrors between 0.25 and 0.50 inches in thickness without additional spacers (thinner mirrors require spacer rings). The optic carrier includes a threaded retaining ring for the mirror.

Dimensions:

Gimbal support plate � 4 inches wide, 4.75 inches tall (0.500 inches thick)
Optic axis height = 2 inches
Range of motion (azimuth and elevation) � approximately plus or minus 2 degrees
Modified Starrett 263 micrometers
Overall depth with micrometers � 4 inches
Minimum / Maximum mirror thickness � 0.25 / 0.60 inches.

Listing includes gimbal mount and the 2 inch optic cell with retaining ring. Condition of everything is excellent. For the most part, these mounts are the earlier versions using heavy cast iron or steel components (later mounts used a much lighter aluminum alloy).

Location MB 99

Photo set 771.

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Mounts for sale.
We will work with you individually to find the perfect set up for your application.

Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search..
***MPN SG201
***OEM Burleigh
***SKU*** DP339

This item is a right-angle support bracket for the Burleigh 2-inch gimbal mounts. It has been slightly modified � the back of the support plate has been milled away so the footprint is no longer 4 inches square. The depth has been reduced to about 3 inches. There are still four clearance holes for mounting the bracket on a table (the fifth has been milled away). Condition of the mount is excellent.

Location MB 97

Photo set 770.

BMI Surplus, Inc. has a huge inventory of used, new, pre-owned and recycled Optical Mounts for sale.
We will work with you individually to find the perfect set up for your application.

Buy online or give us a call at 781-871-8868. We have experienced customer service representatives standing by ready to help you!

BMI Surplus, Inc. is a dealer in used and sometimes new Surplus Scientific & Industrial Equipment – we cater to clients in search of items to be used for specific applications.
We do not offer a guarantee as many of our items are purchased by professionals in need of parts and pieces.
You will find many of our items listed on our website as untested or as parts or repair units even though in they are in good used condition.

**Shipping, Handling & Freight fees are dependent on your location.
We will provide a freight quote to meet your individual needs and work with you if you prefer to use your own carrier.
We have 32 years of experience shipping sensitive scientific instruments & industrial equipment!

Don’t see what you are looking for? Use our orange search box on the top right hand corner of this page to customize your search.
***MPN SG201
***OEM Burleigh
***SKU*** DP338